Devices
Potentiometers
Adding the device

Adding the device

Open the MobiFlight Modules dialog

Click on the MobiFlight Modules button in the main window toolbar.

Screenshot of the MobiFlight Modules button in the main window toolbar.

Add the potentiometer

Click on the board the device is connected, then select Analog Input from the Add device menu.

Screenshot of the menu open with the Analog Input item highlighted.

Configure the potentiometer

Use the Pin settings dropdown to specify the board pin the potentiometer is connected to. Only analog pins are supported.

Adjust the sensitivity using the Sensitivity slider. The slider controls how large a change in value must occur before MobiFlight recognizes the change.

Provide a meaningful name for the potentiometer in the Name field. This name is shown in the input configuration screens when assigning the potentiometer to a flight simulator input.

Screenshot of the settings for a potentiometer, with pin A0 selected, medium-high sensitivity, and Analog Input as the name.

Upload the changes to the board

Click the Upload config button at the bottom of the MobiFlight Modules tab to upload the modified configuration to the board.

Screenshot of the MobiFlight Module dialog with the Upload config highlighted.

Close the MobiFlight modules dialog

Click the OK button to close the MobiFlight modules dialog and return to the main app window.

WiringConfiguring the input